![]() Adjust the pull out extender screen on the right side for a tight fit (from 0.5 inch to 7 inch (1.3-17.8cm) ). For 35 inch to 37 inch (89-94cm): Use two 3 inch (7cm) extender panels on the left side.For 28 inch to 34 inch (71-86cm): Use one 3 inch (7cm) extender panel on the left side.For 24 inch to 27 inch (61-69cm): Use up to 3 inch (7cm) of right side, pull out extender screen.Push the locks back into place to secure the extender screen at the desired length. The extender screen can be adjusted by pulling out the extender locks located on the top and bottom of the right side of the fan.The extender panels can be secured to the fan by simply sliding the extender panels into the grooves located on the left hand side of the fan.NOTE: For slider windows, set the fan vertically in your window opening, with the left side on the bottom. Do not lean or push on fan while it is in the window. WARNING: Be sure fan is securely installed in your window at all times. Step 3: To keep the fan in place, carefully close the window so that the bottom edge of the window rests on the flat area on the top of the window fan. ![]() Step 2: If the fan does not fit snugly to the top and bottom of the window casing, attach the included extender panel(s) and pull out the built-in extender screen until the fan fits safely in your window (See Figure 3).Step 1: Set the fan into your window opening.Window Fan Installation: The window fan has been designed to fit double-hung, slider and casement windows. If you have any questions regarding your product or would like to learn more about other Bionaire® products, please contact our Consumer Service Department at 1-80 or visit our website at INSTALLATION INSTRUCTIONS Refer to the Cleaning/Maintenance Instructions section. Use a vacuum cleaner with a dust brush attachment. The outside of the fan can be wiped down with a damp cloth. This is normal when circulating unfiltered air. Refer to the Window Fan Installation section Please note that when installing vertically, the internal adjustable extender panel must be located on the top of the window fan and never on the bottom. ✔ Window fans can be installed either vertically or horizontally. ☛ Fan may need to be installed vertically. My window fan will not fit horizontally in the window. Close the sash completely on top of the window so it is secure. ✔ Ensure that the bottom edge of the window sash fits into the groove along the top of the fan. ☛ Fan may not be set in the window properly Refer to Automatic Operating Instructions.įan is not secure in my window and moves during operation ✔ Set the temperature on the fan so that it is lower than the room temperature. Refer to Manual or Automatic Operating Instructions. ✔ Turn the fan on using the speed button. ☛ Preset temperature on the fan is set too high. ☛ The fan is plugged in and is set to the Off position ✔ Adjust the airflow direction switches to intake, exhaust, or air exchange.įan will not operate even though I am turning on the fan with the speed control button. ☛ Airflow direction switches are not in the correct position. The air is not moving in the direction that I want it to.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |